| Code | D9510 |
|---|---|
| Capacity | Ø6.34mm x 77mm |
| Weight (kg) | 0.1 |
| Weight (m3) | 0.000 |
| Weight (Freight) | 0.1 |
| Dimensions (cm) | 6 x 3 x 3 |
Broach Locating Pin - Toolmaster Ø6.34mm x 77mm
Description
Locating pin to suit Toolmaster 30mm cutters.The spring-loaded pilot pin quickly picks up the location of the hole from a centre punch mark.
It also is used to eject the slug at the completion of the cut.
Note! It is not recommended to use the cutter without the pilot pin
Specifications
- Compare 1 Products
- ORDER CODE
- Brand
- Pin Diametermm / inch
- Pin Lengthmm
- Suits Broach Cutter - Drill Depth
- D9510
- Toolmaster
- Ø6.34
- 77
- 30
| ORDER CODE | Toolmaster |
|---|---|
| Brand | Ø6.34 |
| Pin Diametermm / inch | 77 |
| Pin Lengthmm | 30 |
| Suits Broach Cutter - Drill Depth |
